How To Activate Bitlocker Windows 10

To enable Bitlocker on your Windows computer, you first demand to be running the Windows ten Pro operating organisation. Windows 7, Windows 8, and 'Windows 10 Home' versions do non back up Bitlocker.

It's a good idea to first know your electric current operating system version. To do so, click on the Commencement Push and type "WinVer" and then press Enter:

Check the version of operating system. You need to accept Windows 10 Pro. As of the time of writing this article, the most version of Windows ten is Version 1909 (Bone Build 18363.592).

If yous accept Windows vii, follow the upgrade instructions below. If you take Windows 10 Home, then you need to purchase the upgrade to Windows 10 Pro, and follow instructions here.

You need to upgrade from Windows 7 Home to Windows 10 Dwelling before you can upgrade to Windows 10 Pro.

Upgrade from Windows 7 Home to Windows 10 Pro

If you are on Windows 7 or Windows eight, practice a web search for the Windows Media Creation Tool, or you tin find it hither: https://www.microsoft.com/en-u.s.a./software-download/windows10

When running the Media Creation Tool, run the Upgrade choice. It will take a while and several reboots to upgrade from Windows vii or 8 to Windows 10. If yous started with Windows 7 Home or Windows 8 Abode, the tool volition most likely upgrade your PC to Windows 10 Domicile.

Later on yous've finished the 'Windows seven Home' to 'Windows 10 Domicile' upgrade, y'all at present need to upgrade from Windows ten Domicile to Windows 10 Pro in order to get the Bitlocker feature.

Upgrade from Windows 10 Dwelling to Windows ten Pro

To upgrade from Windows 10 Home to Windows ten Pro, click on the commencement push and type 'Microsoft Shop' and press Enter.

In the store, search for Windows 10 Pro in the upper-right corner of the store:

Buy the upgrade ($99) and and so run the upgrade. The process will accept a while and several reboots.

In one case you lot are on Windows 10 Pro, open the File Explorer, click This PC, and so Righ- click on the C: drive and choose Turn on Bitlocker or Manage Bitlocker.

Follow the prompts and enable bitlocker.

You may see a problem where an quondam PC does not have a TPM chip, so you will have to edit the local Group Policy in order to allow Bitlocker without TPM enabled. The guide for doing so can be found here: https://world wide web.digitalcitizen.life/how-enable-bitlocker-without-tpm-scrap-windows-7-windows-8
Enable Bitlocker for the C: drive – Save the Bitlocker encryption/decryption cardinal to a removable USB drive, save to the cloud, and print for a hard copy. This password to unlock the drive and the Recovery/Decryption cardinal are very important, practice not lose them.
Follow the default prompts (ok to skip arrangement cheque) and the drive volition begin encryption. You lot should meet a condition bar and progress indicator showing the pct of encryption. When it reaches 100%, the encryption process has finished.
Reboot the organisation to complete the encryption of the bulldoze.

Subsequently the reboot, log in to the desktop again, and use the Windows Command Panel to cheque the status. Please follow instructions here:

https://social.technet.microsoft.com/wiki/contents/articles/969.how-to-decide-if-bitlocker-drive-encryption-is-enabled.aspx

Source: https://jasoncoltrin.com/2020/04/03/how-to-install-and-enable-bitlocker-encryption-on-windows-10-pro/

Posted by: mcdowellwhoustoll.blogspot.com